Nextiva S1712e Compact, 12-Port Video Encoder
Cost-Effective Video Encoder for Up to 12 Cameras
| At A Glance |
|---|
|
Nextiva S1712e Feature Set
The Nextiva S1712e is a 12-port video encoder that combines low cost of ownership with a compact, efficient design. The Nextiva S1712e accommodates 12 video streams in a 1U, 6-inch (15-cm) deep enclosure. Ideal for large installations, the S1712e delivers dual stream, MPEG-4 SP or SM4 video up to 4CIF/15 frames per second or 2CIF/30 frames per second. Dual streaming enables video to be viewed at high resolution for excellent image clarity, but stored at lower resolution, optimizing use of storage resources.
The S1712e video server incorporates Verint’s industry-leading video encoding technology for superior imagery and optimal bandwidth utilization. A noise reduction filter further reduces bandwidth use, while enhancing image clarity. Automated camera tampering detection rapidly determines when cameras are out of focus, to help ensure that critical images are available and reduce the need to physically examine each camera on site.
SSL-based authentication helps prevent unauthorized access. An RS-232 serial port is provided for for integration with access control systems, and an RS-422/485 serial port supports motorized domes and cameras.
Energy Efficient, Longer Life, Lower Cost of Ownership
The Nextiva S1712e features an external power supply, virtually eliminating the need to replace functional encoders because of faulty internal power units. Nextiva S1712e power consumption is just 20W, so it uses far less power than competitive products. This makes the S1712e a highly efficient, energy-saving choice. And the S1712e can be managed using Nextiva Enterprise or third-party video management software (via the Nextiva Advantage SDK), enabling organizations to deploy the video management solutions that best address their budgets and objectives.
Easy to Install, Less Costly to Service
The Nextiva S1712e video server is built for easy installation and operation in virtually any type of video system. These rack-mountable encoders can be placed in an IT closet with other network equipment, plugged into the Ethernet network, and configured individually using Verint’s Windows-based SConfigurator software or in batches using Nextiva Control Center.
Nextiva S1712e Technical Specifications
Network | Video | Serial Port | Alarm & Audio | Power | Physical | Management | Certification & Regulation |Models | Warranty
| Network | |
| Interface | Ethernet 10/100Base-T |
| Connector | RJ-45 jack |
| Protocols | Transport: RTP/IP, UDP/IP, TCP/IP, or multicast IP Others: DNS, NTP, HTTP, FTP, and DHCP client |
| Security | SSL-based authentication |
Return to Technical Specifications Menu
| Video | |
| Input | 12 composites, 1 Vpp into 75 ohms NTSC/PAL |
| Dual Stream | 4CIF/7.5fps and CIF/30fps programmable |
| Connectors | BNC female |
| Compression | MPEG-4 SP, SM4 |
| Resolution | Scalable from 352x240 to 704x480 pixels NTSC and 352x288 to 704x576 pixels PAL |
| Frame Rate | 12 x 1-30fps NTSC, 1-25fps PAL programmable (full motion) |
| Bandwidth | Each stream configurable from 30Kbps to 6Mbps |
Return to Technical Specifications Menu
| Serial Port | |
| Electrical Levels | Port 1: RS-232 (max. 230 kbps) Port 2: RS-422/485 2/4 wires (max. 230 kbps) |
| Connectors | Port 1: DB-9 female (DCE) Port 2: pluggable screw-terminal strip |
| Operating Mode | Transparent serial port supporting any asynchronous serial protocol |
Return to Technical Specifications Menu
| Alarm & Audio | |
| Alarm | Input: 12 dry contacts Output: 2 relay contacts (48V AC/DC at 100 mA max.) |
| Bi-Directional Audio (optional) | Input: -46 to -3 dBV into 30 kohms (line or microphone) Output: -46 to -3 dBV into 8 ohms min. Connectors: 1 set of 1/8 in. (3.5 mm) input and output stereo jacks |
| Uni-Directional Audio (optional) | Input: 12 ports -46 to -3 dBV into 30 kohms (line or microphone) Programmable bias: 0-9V DC 16-bit resolution 8, 16, or 24 KHz sampling rate Connectors: 1 set of 1/8 in. (3.5 mm) input stereo jacks |
Return to Technical Specifications Menu
| Power | |
| Supply/Voltage | 12V DC +/- 10% (20W) |
Return to Technical Specifications Menu
| Physical | |
| Enclosure | Metal case with flange mount (black) |
| Dimensions | 17L x 6.1W x 1.7H in. (431.8L x 154.9W x 43.2H mm) |
| Weight | 5.3 lbs (2.4 kg) |
| Environmental | 32ºF to 122ºF (0ºC to 50ºC) |
| Humidity | 95% non-condensing at 122ºF (50ºC) |
Return to Technical Specifications Menu
| Management | |
| Configuration | Remote: Nextiva, SConfigurator Local: via the serial port using any ASCII terminal |
| Firmware Upgrade | Flash memory for upgrade of firmware over the network; remote batch upgrade available through Nextiva Control Center and SConfigurator |
Return to Technical Specifications Menu
| Certification and Regulation | |
| RoHS compliant, UL compliant | |
| USA | UL, FCC Part 15 (Subpart B, Class A) |
| Canada | ICES-003/NMB-003 |
| Europe | CE marked, EN 55022: 1998 Class A, EN 55024 |
Return to Technical Specifications Menu
| Models | |
| S1712e-T | 12-input IP video encoder |
| S1712e-T-A | With 1 bi-directional audio channel |
| S1712e-T-12iA | With 12 uni-directional audio ports |
Return to Technical Specifications Menu
| Warranty | |
| 3-year limited warranty covering parts and labor (for the Americas). Contact your Verint representative for warranty details for other regions. |
Return to Technical Specifications Menu
Nextiva S1712e Product Documentation
As the market leader in IP video management solutions, Verint should be on the short list of every enterprise buyer.
With 35% of the encoder and video server market, Verint was awarded the 2007 Frost & Sullivan Award for Market Leadership.
