Nextiva S1800e Single and Dual-Port Encoders Featuring H.264 Technology

The benefits of H.264 — exceptional performance plus optimal storage and bandwidth utilization — at a significantly lower price

At A Glance
  • Single- and dual-port video encoders with triple- stream H.264 video compression, resolution up to D1/30fps, and storage on the edge
  • Ideal for one- and two-camera video surveillance implementation in large, distributed networks, that require excellent video quality, compact design, optimal bandwidth and storage utilization, and lower cost of operation
  • Enables organizations to realize the benefits of IP video using their analog cameras
  • Reliable and IT friendly, with SNMP, an embedded Linux operating system, and flexible configuration and maintenance
  • Compatible with Nextiva Video Management software and a Verint web interface for configuration and live video viewing
  • Energy efficient and environmentally friendly, with a small form factor

 

Nextiva S1800e Feature Set

Nextiva® S1800e single- and dual-port encoders combine exceptional performance and an outstanding feature set with the low cost of ownership and operation associated with H.264 video compression technology.

These encoders are ideal for one- or two-camera implementations, including point-to-point applications, in which excellent video quality, a compact design, and storage and bandwidth optimization are key. The S1800e single- and dual-port encoders couple superior video resolution up to D1 with the dramatically lower bitrate of H.264 video compression, reducing bandwidth and storage utilization up to 50% over MPEG-4. With support for up to three H.264 video streams at D1/30fps, camera tampering detection and storage on the edge (a failover mechanism that ensures video is recorded in case connection with the management software is lost), these devices deliver the high reliability of Verint’s third-generation encoders, plus IT-friendly features, easy implementation and maintenance, and an environmentally friendly design. 
 

IT Friendly and Easy to Manage

You can manage the S1800e single- and dual-port encoders just as you would any other enterprise IT asset. SNMP facilitates integration with IT infrastructures, and an embedded Linux operating system provides superior security and reliability.

You can configure these encoders using Nextiva Control Center, Verint SConfigurator™ software, or a Verint Web browser interface that also provides live video viewing. And, like all Nextiva S1800e Series devices, these single- and dual-port encoders are fully integrated with Nextiva Video Management software — centralized device management, automated health monitoring, remote video viewing, and more — making it easier to view and manage large, geographically-dispersed video operations and devices that are located in isolated or hard-to-reach locations. 
 

Energy Efficient, with a Light Environmental Footprint

The compact, lightweight S1800e encoders have a 1U metal enclosure and are supplied with an external ENERGY STAR qualified power supply for reduced energy consumption. These enterprise-class encoders are also certified compliant with RoHS, UL, CE, and other widely accepted safety and environmental standards and directives.

 

Advanced Video Technology with Lowest TCO

Verint® is at the forefront of networked video technology, with nearly two decades of experience delivering security intelligence solutions to government and industry worldwide. With the S1800e single- and dual-port encoders, Verint provides versatile edge devices built on the latest video technologies, integrated with the industry’s broadest video portfolio, and designed for lowest cost of ownership and operation.

 

Nextiva S1800e Single- and Dual-Port Technical Specifications

Video | Network/Storage | Serial Ports | Alarm | Audio | Power | Physical | Management | Certification & Regulation | Models | Optional Accessories | Warranty

 

Video
Input 1 composite, 1 Vpp into 75 ohms NTSC/PAL, BNC female
Quadruple Streams 3 x H.264, 1 x MJPEG streams
Performance D1/30fps on all streams simultaneously for up to 10Mbps
Compression H.264 (MPEG-4 Part 10/AVC) Main Profile and MJPEG
Resolution Scalable from CIF (352x240 pixels for NTSC; 352x288 pixels for PAL) to D1 (720x480 pixels for NTSC; 720x576 pixels for PAL)
Frame Rate 1-30fps NTSC, 1-25fps PAL programmable (full motion)
Bandwidth Each stream configurable from 30Kbps to 6Mbps

 

Return to Technical Specifications Menu

 

Network/Storage
Interface 1 RJ-45, Ethernet 10/100 Base-T
Protocols Transport: RTP/IP, UDP/IP, TCP/IP, or multicast IP
Others: DNS, NTP, SNMP v1/v2c/v3 (MIB-II), HTTP, HTTPS, DHCP client, and 802.1X
Security SSL-based authentication, password protected, HTTPS

 

Return to Technical Specifications Menu

 

Serial Ports
Electrical Levels Port 1: RS-232 (max. 230 kbps) pluggable clip-terminal strip or RS-422/485 2/4 wires (max. 230 kbps) pluggable clip-terminal strip
Operating Mode Transparent serial port supporting any asynchronous serial protocol
Storage SDHC MicroSD Card, up to 32 GB (SD card not included)

 

Return to Technical Specifications Menu

 

Alarm
Input 2 dry contacts
Output 1 relay contact (48V AC/DC at 100 mA max.)

 

Return to Technical Specifications Menu

 

Audio
Bi-Directional Input: -46 to -3 dBV into 30 Kohms (line or microphone input)
Output: -46 to -3 dBV into 16 ohms min.
Connectors 1/8 in. (3.5 mm) stereo jacks

 

Return to Technical Specifications Menu

 

Power
Supply
Voltage
12V DC +/- 10%
Power Supply 12V DC included with non-PoE models
Power Consumption Max. 5W
Max. Output Power 5W (with PoE models only)

 

Return to Technical Specifications Menu

 

Physical
Enclosure 1U metal case with flange mount (black)
Dimensions 4.2L x 3.5W x 1.7H in. (106L x 90W x 42H mm)
Weight 9.2 oz. (260 g)
Operating Temperature 32ºF to 140ºF (0ºC to 60ºC) [except PoE model: 32ºF to 131ºF (0ºC to 55ºC)]
Humidity 95% non-condensing at 140ºF (60ºC)
Firmware Embedded Linux-based operating system

 

Return to Technical Specifications Menu

 

Management
Configuration and Firmware Upgrade Supported through Nextiva Control Center (single device and batch mode firmware upgrade), SConfigurator, and Web browser interface (single device firmware upgrade)

 

Return to Technical Specifications Menu

 

Certification and Regulation
  RoHS compliant
USA UL, FCC Part 15 (Subpart B, Class A)
Canada ICES03 class A
Europe CE marking (EN55022, EN55024)

 

Return to Technical Specifications Menu

 

Models
S1801e 1-Port video encoder featuring H.264 technology with 1 bi-directional audio channel and ENERGY STAR 12V DC universal power supply
S1801e-PoE With PoE support
S1802e With 2 video ports and ENERGY STAR 12V DC universal power supply

 

Return to Technical Specifications Menu

 

Optional Accessories
VRM8 19-inch rack mount panel for 8 units of the Nextiva S1800e series
PSPOE Power over Ethernet injector

 

Return to Technical Specifications Menu

 

Warranty
3-year limited warranty covering parts and labor (for the Americas). Contact your Verint representative for warranty details for other regions.

 

Return to Technical Specifications Menu

 

Nextiva S1800e Product Documentation







Verint Home | About Verint | Contact Center | Branch & Remote Office | Back-Office Operations

IP Video | Communications Intelligence & Investigative Solutions | Public Safety

Verint Regional Websites: Brazil | Canada | China | France | Germany | Italy | Japan | Mexico | Russia | Spain
© 2010 Verint Systems Inc. All Rights Reserved. | Privacy Policy | Terms of Service | WEEE Compliance