Nextiva S2600e and S2610e IP Cameras with On-Board Video Analytics

Super wide dynamic range IP cameras for high-contrast, day-to-night lighting conditions

At A Glance
  • High-end, super wide dynamic range IP cameras with day/night function on S2610e models
  • Dual-stream, MJPEG and/or MPEG-4 SP video up to 4CIF/30fps
  • Optional video analytics and 2.7x zoom lens
  • Supports interlaced and progressive scan video
  • Easy installation using Web wizard or Nextiva, with analog output and PoE
  • Configure and manage using Nextiva or other video management systems

 

Nextiva S2600e and S2610e Feature Sets

The Nextiva S2600e and S2610e professional IP cameras feature super wide dynamic range (102 dB) and low lux sensitivity for excellent image quality in high-contrast and day/night lighting conditions. These features allow the S2600e and S2610e to be installed in virtually any environment. The S2600e provides color video, and the S2610e provides day-to-night functionality.  

 

Designed for high performance and low cost of ownership, the S2600e and S2610e IP cameras incorporate Verint’s industry-leading encoding technology to provide excellent image quality, while using far less network bandwidth than comparable high-end IP cameras. These cameras generate a low amount of noise, which translates to more efficient compression and a lower bitrate.

The S2600e and S2610e deliver dual stream, MPEG-4 SP and/or MJPEG video up to 4CIF/30 frames per second. Dual streaming allows video to be viewed at high resolution with excellent image clarity, but stored at lower resolution to optimize use of storage resources. Available on-board video analytics rapidly detect significant activity without sending all video to centralized servers for analysis, further reducing the amount of video to transport and store.

The S2600e and S2610e IP cameras support both interlaced and progressive scan video, providing distortion-free images on analog and digital video monitors. They help organizations realize the benefits of IP video using their existing analog equipment and ease migration to IP video. 

 

Easy to Install and Manage, Plus Lower Service Costs

The S2600e/S2610e wide dynamic range IP cameras are built for easy installation and operation in virtually any video system. They can be installed using a browser-based Verint wizard or Nextiva Enterprise. An analog output comes standard with the S2600e/S2610e for fast and accurate setup on site, and available Power over Ethernet reduces wiring requirements and installation costs.

The S2600e/S2610e can be managed using Nextiva Enterprise or other video management software via the Nextiva Advantage SDK. The S2600e/S2610e can also be configured and managed using Verint nDVR or Loronix Video Manager.

Nextiva Control Center, an easy-to-use management portal, simplifies deployment and enables configuration and administration of the S2600e/S2610e from a single location and application. Nextiva HealthCheck continuously monitors the performance of the S2600e/S2610e, with automated diagnostics and problem correction for greater uptime and lower service costs. 

 

Nextiva S2600e/S2610e Technical Specifications

General | Network | Video | Alarm | Power | Physical | Management | Certification & Regulation | Models | Warranty

 

General
Imaging Device 1/3-inch digital sensor (DPS technology)
Zero smear  
Dynamic Range 102 dB typical/120 dB maximum
Picture Elements 742(H) x 554(V)
Synchronization Internal
Iris Control Automatic/manual
Auto Iris Lens Type DC-drive
Day/Night Support Automatic IR filter drive
Lens (Optional) Varifocal 2.9-8mm F0.95, DC auto iris, IR compatible
Focusing range: 0.3m to infinity
Angle of View (H x V) Wide: 94º x 69º; Tele: 35º x 26º (with supplied lens)

 

Return to Technical Specifications Menu

 

Network
Interface Ethernet 10/100Base-T
Connector RJ-45 jack
Protocols Transport: RTP/IP, UDP/IP, TCP/IP, or multicast IP
Others: DNS, NTP, HTTP, FTP, and DHCP client
Security SSL-based authentication

 

Return to Technical Specifications Menu

 

Video
Analog Output 1 composite, 1 Vpp into 75 ohms (NTSC/PAL)
Connectors: BNC female
Horizontal Resolution 520 TVL (RGB), >480 TVL typical 
Vertical Resolution 460 TVL
Minimum Illumination S2600e: 0.5 lux, F/1.2, 40 IRE in color
S2610e: 0.05 lux, F/1.2, 40 IRE in black and white
Signal-to-Noise Ratio Greater than 48 dB
Compression MPEG-4 SP; MJPEG available on some models and can be run simultaneously with MPEG-4 SP
Resolution Scalable from 176 x 128 to 704 x 480 pixels NTSC and 176 x 144 to 704 x 576 pixels PAL
Frame Rate 1-30fps programmable (full motion)
Bandwidth Configurable 30Kbps to 6Mbps
Dual Stream 4CIF/30fps and CIF/15fps programmable

 

Return to Technical Specifications Menu

 

Alarm
Input 1 dry contact
Output 1 relay contact (48V AC/DC at 100 mA max.) 

 

Return to Technical Specifications Menu

 

Power
Supply Voltage 12V DC +/- 10% or PoE 802.3af Class 3 device (not available with on-board analytics)
Connector 5.5W (7.5W with on-board analytics)

 

Return to Technical Specifications Menu

 

Physical
Lens Mount CS mounts 
Camera Mount 1/4-inch UNC-20 screw, bottom of camera housing
Enclosure Metal case
Dimensions 5.5L x 3W x 2H in. (140L x 76.5W x 51H mm)
Weight 0.82 lbs (0.37 kg)
Environmental 32ºF to 122ºF (0ºC to 50ºC), 32ºF to 104ºF (0ºC to 40ºC) with analytics
Humidity 95% non-condensing at 122ºF (50ºC)

 

Return to Technical Specifications Menu

 

Management
Configuration Nextiva, nDVR, Loronix Video Manager, SConfigurator, or Internet Explorer 6.0
Firmware Upgrade Flash memory for upgrade of application firmware over the network

 

Return to Technical Specifications Menu

 

Certification and Regulation
RoHS compliant 
USA FCC Part 15 (Subpart B, Class A)
Canada ICES-003/NMB-003
Europe CE marked, EN 55022: 1998 Class A, EN 55024

 

Return to Technical Specifications Menu

 

Models
S2600e Super wide dynamic range IP cameras
S2610e Super wide dynamic range IP cameras with day-to-night function
S2600e-AS/
S2610e-AS
With on-board analytics*
S2600e-L1/
S2610e-L1      
With 2.7x zoom lens
S2600e-AS-L1/ S2610e-AS-L1 With on-board analytics* and 2.7x zoom lens

* Nextiva analytic applications licensed seperately

 

Return to Technical Specifications Menu

 

Warranty
3-year limited warranty covering parts and labor (for the Americas). Contact your Verint representative for warranty details for other regions.

 

 

Note that lenses recommended for use with the S2600e/S2610e should have a C mount (with adaptor) or CS mount, 1/3-inch format, and be IR compatible with manual or DC auto iris.

 

Nextiva S2600e Product Documentation







Verint Home | About Verint | Contact Center | Branch & Remote Office | Back-Office Operations

IP Video | Communications Intelligence & Investigative Solutions | Public Safety

Verint Regional Websites: Brazil | Canada | China | France | Germany | Italy | Japan | Mexico | Russia | Spain
© 2010 Verint Systems Inc. All Rights Reserved. | Privacy Policy | Terms of Service | WEEE Compliance