Nextiva S2700e-VR Vandal-Resistant, Indoor/Outdoor IP Mini-Dome Camera
High-resolution IP mini-dome with weatherproof and dustproof enclosure for indoor or outdoor use
| At A Glance |
|---|
|
Nextiva S2700e-VR Feature Set
The Nextiva S2700e-VR is a full-featured, vandal-resistant IP mini-dome camera designed to capture high-quality images in both indoor and outdoor environments. Built to withstand wide variations in temperature and weather, the S2700e-VR features an alloy casing and polycarbonate dome that protect the device from tampering, as well as from dust, rain, and extreme temperatures. An IP66 rating and optional extended temperature support rounds out the features that make this IP camera ideal for indoor or outdoor use.
The S2700e-VR IP camera uses CCD sensors for high-quality images with a horizontal resolution of 540 TV lines. Designed for both color and day-to-night use, the S2700e delivers dual stream, DVD-quality video at 4CIF/30 frames per second (fps). In low lighting conditions, the camera automatically adjusts to black-and-white mode for optimal image clarity. Low 0.4 lux sensitivity produces clear, crisp images in even poor lighting conditions.
The S2700e-VR mini-dome also uses auto-iris technology that automatically adjusts the amount of light that reaches the image sensor, optimizing image quality in a variety of lighting conditions.
Easy to Install and Manage, Plus Lower Service Costs
The Nextiva S2700e-VR mini-dome is designed for easy installation. A triple axis lens rotation system provides superior flexibility in camera placement and adjustment, allowing camera installation virtually anywhere. An analog output comes standard with the S2700e-VR for fast and accurate setup on site. Power over Ethernet (PoE) is also supported, and a PoE injector is available as an option.
The S2700e-VR can be managed using Nextiva Enterprise or other video management software via the Nextiva Advantage SDK.
Nextiva Control Center, an easy-to-use management portal, simplifies deployment and enables configuration and administration of the S2700e-VR IP camera from a single location and application. Nextiva HealthCheck continuously monitors the performance of the S2700e-VR, with automated diagnostics and problem correction for greater uptime and lower service costs.
Nextiva S2700e-VR Technical Specifications
General | Network | Video | Alarm | Power | Lens | Physical | Management | Certification & Regulation | Models | Warranty
| General | |
| Imaging Device | 1/4-inch IT CCD |
| Picture Elements | 380,000 effective pixels |
| Sensor Resolution | 768(H) x 494(V) NTSC or 752(H) x 582(V) PAL |
| Synchronization | Internal |
| Iris Control | Automatic |
| Day/Night Support | Automatic - on/off user selectable |
Return to Technical Specifications Menu
| Network | |
| Interface | Ethernet 10/100Base-T |
| Connector | RJ-45 jack |
| Protocols | Transport: RTP/IP, UDP/IP, TCP/IP, or multicast IP Others: DNS, NTP, HTTP, FTP, and DHCP client |
| Security | SSL-based authentication |
Return to Technical Specifications Menu
| Video | |
| Analog Output | 1 composite, 1 Vpp into 75 ohms (NTSC/PAL) Connectors: RCA female |
| Horizontal Resolution | 540 TV Lines typical |
| Minimum Illumination | 0.75 lux, F/1.3 in color mode 0.4 lux, F/1.3 in black-and-white mode |
| Signal-to-Noise Ratio | 50 dB (AGC off) |
| Compression | MPEG-4 SP and MJPEG |
| Resolution | Scalable from 176 x 128 to 704 x 480 pixels NTSC and 176 x 144 to 704 x 576 pixels PAL |
| Frame Rate | 1-30fps programmable (full motion) |
| Bandwidth | Configurable 9Kbps to 6Mbps |
| Dual Stream | 4CIF/30fps and CIF/15fps programmable |
Return to Technical Specifications Menu
| Alarm | |
| Input | 1 dry contact |
| Output | 1 relay contact (48V AC/DC at 100 mA max.) |
Return to Technical Specifications Menu
| Power | |
| Supply Voltage | 12V DC +/- 10% or PoE 802.3af Class 3 device |
| Heater Voltage (optional) | 24V AC (24VA max.) |
Return to Technical Specifications Menu
| Lens | |
| Focal Length | F = 2.8 mm to 10 mm, 3.6x varifocal |
| Aperture Ratio | F1.3 to F3.0 |
| Angle of Vision | 73° (h) × 54° (V) to 20° (h) × 15° (V) |
| Lens Adjustment | Horizontal 350°, Vertical ±80°, Tilt ±175° |
Return to Technical Specifications Menu
| Physical | |
| Camera Mount | Surface mount with electrical conduit back or side |
| Dimensions | 4 7/8 H x 6 ¼ D in. (125 H × 160 D mm) |
| Weight | 2.86 lbs (1.3 kg) |
| Environmental | 14ºF to 122ºF (-10ºC to 50ºC) or -22ºF to 122ºF (-30ºC to 50ºC) with optional heater |
| Humidity | 95% non-condensing at 122ºF (50ºC) |
| Ingress Protection Level | IP66 |
Return to Technical Specifications Menu
| Management | |
| Configuration | Nextiva, nDVR, or Internet Explorer 6.0 |
| Firmware Upgrade | Flash memory for upgrade of application firmware over the network |
Return to Technical Specifications Menu
| Certification and Regulation | |
| RoHS compliant | |
| USA | FCC Part 15 (Subpart B, Class A) |
| Canada | ICES-003/NMB-003 |
| Europe | CE marked, EN 55022: 1998 Class A, EN 55024 |
Return to Technical Specifications Menu
| Models | |
| S2700e-VR | Vandal-resistant NTSC IP mini-dome camera with day/night function; PoE or 12V DC (12V DC power supply included) |
| S2700e-VR-XT | With extended temperature support: -22ºF to +122ºF (-30ºC to 50ºC) |
| S2700eP-VR | Vandal-resistant PAL IP mini-dome camera with day/night function; POE or 12V DC (12V DC power supply included) |
| S2700eP-VR-XT | With extended temperature support: -22ºF to +122ºF (-30ºC to 50ºC) |
| Accessories |
Also available for purchase separately: PoE injector |
Return to Technical Specifications Menu
| WarrantyNextiva S2700e-VR Camera Mount Data Sheet | |
| 3-year limited warranty covering parts and labor (for the Americas). Contact your Verint representative for warranty details for other regions. |
Return to Technical Specifications Menu


